MIDI input check

Does low-pass filtering affect MIDI conversion?

Not in this controlled exposed-melody fixture. One-pole low-pass cutoffs from 4,000 Hz to 200 Hz retained all eight notes.

One-pole low-pass filters from 4000 to 200 hertz each retain all eight MIDI notes.
Removing high frequencies alone did not change the tested pitch events.
Short answer: do not add a low-pass filter just to improve a clear melody-to-MIDI result. This fixture remained eight retained notes down to the tested 200 Hz cutoff. Best with one exposed melody, not chords or a full mix.

Convert one clear melody

Controlled low-pass check

One-pole low-pass cutoffMedian across 10 fixtures
4,000, 1,600, 800, 400, 200 Hz8 retained; 0 missed; 0 extra

Fixture conditions and limits

Each point used 10 mono 44.1 kHz fixtures with eight alternating C4/E4 synthetic voice-like harmonic notes, 120 ms per note, amplitude 0.70, and an 8 ms fade. Only the stated one-pole low-pass filter changed. Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop stayed fixed. Retained means exactly one output within 50 cents and at least 50% overlap; unmatched output is extra. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal filtering or accuracy promise.

Related: sample rate · audio clipping