MIDI input check

Does reverb tail affect MIDI conversion?

In this controlled eight-note check, synthetic reverb mixes through 0.5 kept all notes. At 0.75, one note was missed and one extra event appeared.

Reverb mix through 0.5 retains eight notes, while stronger mixes produce missed and extra MIDI events.
Reverb became a variable only at the stronger tested mixes.
Short answer: use a drier source before treating a missing or extra MIDI event as a performance error. This fixture stayed clean through a 0.5 reverb mix; 0.75 created one miss and one extra. Best with one exposed melody, not chords or a full mix.

Convert one clear melody

Controlled reverb-tail check

Synthetic multi-tap reverb mixMedian across 10 fixtures
0, 0.25, 0.58 retained; 0 missed; 0 extra
0.757 retained; 1 missed; 1 extra
1.06 retained; 2 missed; 1 extra

Fixture conditions and limits

Each point used 10 mono 44.1 kHz fixtures with eight alternating C4/E4 synthetic voice-like harmonic notes, 120 ms per note, amplitude 0.70, and an 8 ms fade. Only the stated three-delay synthetic reverb mix changed. Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop stayed fixed. Retained means exactly one output within 50 cents and at least 50% overlap; unmatched output is extra. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal reverb or accuracy promise.

Related: background noise · silence between notes