MIDI input check

When does background noise affect MIDI conversion?

In this controlled short-note check, noise amplitudes through 0.3 retained the C4. At 0.4 and above, the note was missed.

A controlled C4 note is retained through noise amplitude 0.3 and missed from amplitude 0.4.
The measured boundary belongs to this source and detector setting.
Short answer: reduce background noise before retrying a missing short note. This fixture retained C4 through 0.3 noise amplitude, then missed it from 0.4. Best with one exposed melody, not chords or a full mix.

Convert one clear melody

Controlled background-noise check

Noise amplitude added to a 40 ms C4Median across 10 fixtures
0.1, 0.2, 0.31 retained; 0 missed; 0 extra
0.4, 0.5, 0.6, 0.70 retained; 1 missed; 0 extra

What the boundary means

The result is a missed event, not a false second note. For a short exposed note, cleaner audio is more useful than raising output volume after the fact. It does not establish a noise limit for recordings, songs, microphones, or other instruments.

Fixture conditions and limits

Each point used 10 generated mono 44.1 kHz 16-bit PCM WAV fixtures: a synthetic voice-like harmonic C4 source at amplitude 0.70, 40 ms attack, and the stated added noise amplitude. The detector used Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop. A retained C4 needed one output within 50 cents and at least 50% overlap; a missed note had no such output; an extra event was any unmatched output. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal background-noise or accuracy promise.

Related: quiet audio · fast note attacks · audio-to-MIDI source checks