MIDI input check

Can audio to MIDI detect high notes?

Only within the selected mode's search range. In this controlled Melody-mode check, C6 at 1046.5 Hz was retained; the higher tested notes were not retained once they passed the 1400 Hz upper search limit.

C6 at 1046.5 hertz is retained in Melody mode while higher tested notes around and above the 1400 hertz search limit are not retained.
Melody mode searches 80 to 1400 Hz; its output is not a promise for pitch above that range.
Short answer: if an exposed high note returns a wrong lower event or no matching event, check whether it sits above Melody mode's 1400 Hz range. Best with one exposed melody, not chords or a full mix.

Open the converter

Controlled high-note check

300 ms source note Median across 10 fixtures Result
C6, 1046.5 Hz 1 retained; 0 missed; 0 extra Matching event retained.
E6, 1318.5 Hz 0 retained; 1 missed; 1 extra One nonmatching event.
G#6, 1661.2 Hz and C7, 2093.0 Hz 0 retained; 1 missed; 1 extra Outside the declared Melody-mode range.

Range is a design boundary

Melody / solo instrument mode searches 80 to 1400 Hz. Bass line mode intentionally searches even lower, 35 to 300 Hz, so it is not a high-note setting. This tool estimates one dominant pitch line; changing modes does not add polyphonic or full-song transcription.

Fixture conditions and limits

Each point used 10 generated mono 44.1 kHz 16-bit PCM WAV fixtures with a synthetic voice-like harmonic source at amplitude 0.70, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop. A retained note required exactly one output within 50 cents and with at least 50% overlap. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal singer, instrument, song, range, or accuracy promise.

Related: Bass line mode · no stable pitch · audio-to-MIDI source checks