MIDI input check

Does high-pass filtering affect MIDI conversion?

Not in this controlled eight-note fixture. One-pole high-pass cutoffs from 200 Hz through 1,600 Hz retained all eight notes with zero median misses and extra events.

Five high-pass filter settings each retain eight MIDI notes.
Only the one-pole high-pass cutoff changed.
Short answer: do not add a high-pass filter solely to improve this kind of clear melody conversion. This fixture retained 8 of 8 notes through 1,600 Hz. Best with one exposed melody, not chords or a full mix.

Convert one clear melody

Controlled high-pass check

One-pole high-pass cutoff Median across 10 fixtures
0, 200, 400 Hz 8 retained; 0 missed; 0 extra
800, 1,600 Hz 8 retained; 0 missed; 0 extra

What this result leaves open

A high-pass filter removes low-frequency energy but this short C4/E4 harmonic fixture still supplied enough periodic information for the detector. It does not test bass-only material, a full mix, or a recording with noise and competing instruments.

Fixture conditions and limits

Each point used 10 mono 44.1 kHz synthetic PCM fixtures with eight alternating C4/E4 voice-like harmonic notes, 120 ms per note, 0.70 source amplitude, and an 8 ms fade. Only the one-pole high-pass cutoff changed. Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop stayed fixed. Retained means exactly one output overlaps at least 50% and is within 50 cents. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal filtering or accuracy promise.

Related: low-pass filtering · electrical hum