MIDI input check

Can quiet audio convert to MIDI?

Only once the source carries enough level for a stable pitch estimate. In this controlled 300 ms C4 fixture, amplitudes through 0.025 produced no retained event; 0.05 and above produced one.

A quiet 300 millisecond C4 source has zero retained events through amplitude 0.025 and one retained event at 0.05 and above.
Source level was the only changing condition in this fixture.
Short answer: if a short exposed phrase produces no notes, try a clearer recording or a source with more level before changing the melody. Best with one exposed melody, not chords or a full mix.

Upload an audio file

Controlled source-level check

300 ms C4 source amplitude Median across 10 fixtures Result
0.004 to 0.025 0 retained; 1 missed; 0 extra No stable event.
0.05, 0.10, 0.70 1 retained; 0 missed; 0 extra One event retained.

What this does not measure

This is a digital fixture amplitude, not a microphone-distance rule or a loudness target for every recording. Noise, distortion, competing pitches, duration, and sample rate are separate variables. Do not amplify a full mix and expect it to become a single melody.

Fixture conditions and limits

Each point used 10 generated mono 44.1 kHz 16-bit PCM WAV fixtures with a synthetic voice-like harmonic C4 source, Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop. A retained note required exactly one output within 50 cents and with at least 50% overlap. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal recording-level, voice, instrument, song, or accuracy promise.

Related: no stable pitch · sample-rate check · short MIDI notes