MIDI input check

Does tremolo affect MIDI conversion?

Not in this controlled eight-note fixture. Tremolo depths through 0.9 at 5 Hz and 10 Hz retained all eight notes with zero median misses and extra events.

Five tremolo settings each retain eight MIDI notes.
Only amplitude modulation depth and rate changed.
Short answer: do not blame audible volume pulsing for a wrong result before checking competing pitches and note duration. This fixture retained 8 of 8 notes at the tested tremolo settings. Best with one exposed melody, not chords or a full mix.

Convert one clear melody

Controlled tremolo check

Tremolo condition Median across 10 fixtures
None; depth 0.4, 0.7, 0.9 at 5 Hz 8 retained; 0 missed; 0 extra
Depth 0.9 at 10 Hz 8 retained; 0 missed; 0 extra

What was modulated

Tremolo changes amplitude, not the declared C4/E4 pitch. The source waveform was multiplied by a smooth 5 Hz or 10 Hz modulation curve at the stated depth. This does not test a volume gate that reaches silence or an instrument recording with another simultaneous pitch.

Fixture conditions and limits

Each point used 10 mono 44.1 kHz synthetic PCM fixtures with eight alternating C4/E4 voice-like harmonic notes, 120 ms per note, 0.70 source amplitude, and an 8 ms fade. Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop stayed fixed. Retained means exactly one output overlaps at least 50% and is within 50 cents. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal tremolo, instrument, song, or accuracy promise.

Related: noise gate duration · pitch vibrato