MIDI input check

Does stereo channel placement affect MIDI conversion?

Yes in the current browser implementation. The detector reads the first decoded channel: a controlled C4 in the left channel was retained, while the same C4 placed only in the right channel was missed.

A C4 in the left stereo channel retains one event; the same note in the right channel retains zero in the current detector.
This is an input-channel behavior, not a test of stereo music quality.
Short answer: if a stereo file has the melody only on the right, export or mix it so the target melody is present in the left or mono channel before converting. Best with one exposed melody, not chords or a full mix.

Upload an audio file

Controlled channel check

300 ms C4 source placementMedian across 10 fixturesResult
Left channel only1 retained; 0 missed; 0 extraMatching event appeared.
Right channel only0 retained; 1 missed; 0 extraNo event appeared.

Why this happens

The detector calls getChannelData(0) before pitch analysis, which selects the first decoded channel. This does not mean all stereo files fail: a normal stereo mix often contains melody information in both channels. It does mean a hard-panned right-only melody is an input condition worth checking.

Fixture conditions and limits

Each condition used 10 generated stereo 44.1 kHz PCM fixtures with a synthetic 300 ms C4 in exactly one declared channel, Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop. A retained note required exactly one output within 50 cents and with at least 50% overlap. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.

These are controlled source checks, not a universal stereo, song, voice, instrument, or accuracy promise.

Related: quiet audio · sample rate · audio-to-MIDI source checks