Does stereo phase affect MIDI conversion?
Not for this tool's tested left-channel fixture. Eight alternating C4/E4 notes retained 8 of 8 notes when the right channel matched the left, was inverted, or was silent.
Controlled stereo phase check
| Left channel | Right channel | Median across 10 fixtures |
|---|---|---|
| Eight alternating C4/E4 notes | Matches the left | 8 retained; 0 missed; 0 extra |
| Same unchanged left melody | Inverted, then silent | 8 retained; 0 missed; 0 extra for each condition |
What this does and does not test
This test changes only the right channel. The site's detector reads decoded channel 0, the left channel, before it estimates pitch. It therefore does not test a stereo player that sums both channels to mono, nor does it mean an opposite-side melody will be found.
Fixture conditions and limits
Each point used 10 stereo 44.1 kHz synthetic PCM fixtures. The left channel held eight alternating C4/E4 voice-like harmonic notes, 120 ms per note, at 0.70 amplitude with 8 ms fades. The right channel was matched, polarity-inverted, or silent. Melody / solo instrument mode, Balanced sensitivity, a 2048-sample analysis window, and a 1024-sample hop stayed fixed. Retained means one output overlapped at least 50% of its declared note and had the declared MIDI value. Detector SHA-256: DDA185AC8FB6A179A4FCFA73FD4197ACC95B8B6F59B233F5D3E330F596309F9F.
These are controlled source checks, not a universal stereo, instrument, song, or accuracy promise.